Installation Procedure - Ricoh A230 Service Manual

BRIDGE UNIT FOR MAILBOX (G912)

3.2.2 INSTALLATION PROCEDURE

[A]

CAUTION
Unplug the main machines power cord before starting the following
procedure.
NOTE: 1) The bridge unit for the mailbox must be installed when the 3000 sheet
finisher (A697) will be installed.
2) The 3000 sheet finisher (A697) can be installed only on the A232 and
A229 machines.
1. Unpack the bridge unit and remove the shipping retainers [A].
NOTE: Do not remove the protective sheet [B] at this time.
2. Remove the mailbox if it has been previously installed.
3. Remove the rear cover [C] of the mailbox (8 screws).
4. Remove the proof tray unit [D] (6 screws, 1 connector).
5. Remove the cover [E].
A230/A231/A232
G912I506.WMF
[B]
20-16
[A]
[D]
[E]
[C]
G909I508.WMF
SM