Ricoh A230 Service Manual page 1046

Rev. 11/05/99
[B]
[A]
[C]
A230I110.WMF
Bracket
Step 9A
6. Open the front cover.
7. Push down the lever (1). Then pull the PCU [A] out a small distance (2), and
move the development unit [B] to the left (3) so that the development unit is
away from the drum, then slide out the PCU completely.
8. Remove three clamps [C].
9. Move the lever [D] to the right, then slide out the development unit [E].
⇒
Note: For machines produced after May 1999 follow Step 9A below.
9A. While loosening screw [F] , turn the bracket counterclockwise, then
remove the development unit [G].
SM
[E]
[G]
[F]
3-7
COPIER INSTALLATION
A231I532.WMF
[D]
A230/A231/A232