Introduction - Ricoh A230 Service Manual

1 INTRODUCTION

1.1 PRECAUTIONS
1.1.1 SWAPBOX AND SOFTWARE
If you purchase SwapBox from an authorized SCM Microsystems dealer, do not
use the software enclosed with the SwapBox. You need to purchase the required
software and license additionally from Ricoh.
The software part number is:
1.1.2 SOFTWARE LICENSE AGREEMENT
Before you use the software, you must agree to the SCM software license
agreement that is enclosed in either the SwapBox or the software.
Users must be responsible for the agreement with SCM Microsystems Inc. Ricoh
Co., Ltd. is not responsible for any legal problems caused by user's actions
contrary to the agreement.
1.2 SYSTEM REQUIREMENTS
• An IBM PC-AT compatible computer with ISA Plug & Play BIOS
• One empty ISA bus slot (SBI-C2P and SBI-D2P)
• One empty 3.5" drive bay (SBI-D2P)
®
• Microsoft
Windows
installed (Refer to section 1.4 for more details.)
• At least 2MB of free disk space on the system partition (the partition where
Windows 95 is installed) for SwapFTL software installation
1.3 ITEMS TO PREPARE BEFORE INSTALLATION
• Computer hardware user's manual
• Windows 95 installation disks or CD-ROM
• Windows 95 service pack (Refer to section 1.4 for more details.)
• SCM SwapBox SBI-C2P or SBI-D2P
SCM/RCH SwapFTL + SwapUTI (rev. 2.01 or later) software diskette, and a
software license
SM
A2309353
®
95 operating system 4.00.950a or later version
18-1
INTRODUCTION
A203/A231/A232