PUNCH WASTE COLLECTION MECHNISM
2.9 PUNCH WASTE COLLECTION MECHNISM
[B]
[D]
[C]
[A]
A697D502.WMF
The punch waste is collected in the punch waste hopper [A], which is under the
punch unit.
When the punch waste covers the hole [B] in the hopper, the hopper sensor [C]
turns on and a message will be displayed after the copy job finishes.
The hopper sensor also works as the hopper set sensor. If the punch waste hopper
is not set, the hopper sensor moves away from the hole in the hopper holder [D]
and a message is displayed. This message is the same as for the hopper full
condition.
A230/A231/A232
SM
17-16