Ram Dump (Function 06) - Ricoh A230 Service Manual

SERVICE LEVEL FUNCTIONS

4.1.12 RAM DUMP (FUNCTION 06)

1. Enter the fax service mode.
2. Press - 3
3. Press one of the following numbers as
required:
0 – G3 memory dump list
1 – G4 memory dump list
NOTE: An optional G4 interface is required
to print the G4 memory dump list.
4. Enter the first four digits of the start and
end addresses, then press !
Example: Start at 480000, end at 4801FF
1 5 - - 1 5 - . !
5. Exit the service mode.
4.1.13 RAM CLEAR (FUNCTION 07)
1. Enter the fax service mode.
2. Press - 4
3. Press one of the following numbers, as
required:
. – Initializes the data in the SRAM,
files in the SAF memory, and the
clock.
/ – Erases all the files stored in the
SAF memory.
0 – Resets the bit switches and the
user parameters.
1 – Initializes the data in the SRAM and
files in the SAF memory.
The machine automatically returns
to standby mode after self-
initialization.
To initialize the fax unit without erasing files or resetting the bit switches, perform
one of the following procedures:
• Hold down the "Speed Dial" key for more than 10 seconds, while the machine is
in facsimile mode. This will initialize the fax unit only.
• Remove the rear cover, and press SW2 on the FCU. This will initialize the fax
unit only.
• Turn off the main power and operation switches and turn them back on. This
initializes the whole machine.
• Hold down the 7 and 8 keys for more than 10 seconds. This will initialize the
whole machine.
A230/A231/A232
4-8
A233M517.tif
A233M523.tif
A233M526.tif
SM