[O]
11. Attach the spacers [O] and [P] to the ADF external tray holder, as shown.
12. Attach the guide [Q] to the tray, as shown
NOTE: The ADF external tray is included in the ADF, not in this option.
13. Change the "ADF original ejection" setting to the "ADF External Tray" using
system settings in the "User Tools" menu. Stamping is not possible if "ADF
Tray" is selected.
After the stamp unit has been installed, the F5 key is dedicated to switching the
stamper on and off. (Note the user function key assignment, below.)
Function keys with Stamp unit
• F1: Start Manual Rx
• F2: Tx result display
• F3: TEL mode
• F4: Not programmed
• F5: Stamper on/off
SM
[P]
A813I504.WMF
3-15
STAMP UNIT
[Q]
A813I505.WMF
A230/A231/A232