Ricoh A230 Service Manual page 1132

Tech Service Bulletin No. A230/A231/A232–069R
Page 2 of 3
!
Installation Procedure: .
Note: There is no double-sided tape attached to the Entrance Mylar (B0043915), so be sure to use the
Tape – Entrance Mylar (A2323903) when installing this new Mylar
1. Remove the Transfer Unit, then the Transfer Belt and Cleaning Blade.
2. Peel off the old Entrance Mylar, then clean the surface of the attachment area underneath.
3. Clean out the inside of the Unit thoroughly.
4. Attach the Remove Paper Dust Mylar (B0043911) as shown in Fig. 1.
5. Attach the Tape – Entrance Mylar (A2323903) and Entrance Mylar (B0043915) as shown in Fig. 1.
Fig. 1
:
6. Attach the Mylar - Drive Roller Entrance (B0043914) to the Transfer Unit Frame, as shown in Fig. 2.
Fig. 2:
80+-5mm
B0043911
B0043914
B0043915
A2323903
Continued...