Ricoh A230 Service Manual page 752

System Switch 1E
No FUNCTION
0
Communication after the TCR
(Journal) data storage area
has become full
0: Possible
1: Impossible
1
Action when the SAF memory
has become full during
scanning
0: The page is erased.
1: The file is erased.
2 RTI/CSI display priority
0: RTI 1: CSI
3
File No. printing
0 : Enabled
1 : Disabled
4
Action when authorized
reception is enabled in the
following conditions:
Receive messages only from
senders whose RTI/CSIs are
programmed AND Authorized
addresses are not
programmed
0 : Authorized reception is
automatically disabled
1 : Authorized reception is
enabled
SM
COMMENTS
This setting is effective only when Automatic TCR
(Journal) printout is enabled.
0: If the buffer memory of the communication
records for the TCR (Journal) is full, fax
communications are still possible. But the
machine will overwrite the oldest communication
records.
1: If the buffer memory of the communication
records for the TCR (Journal) has become full, fax
communications will become impossible, to
prevent overwriting the communication records
before the machine prints them out.
Cross Reference
Y
Automatic TCR (Journal) output - User switch
03, bit 7
Y
Number of communication records for TCR
(Journal):
200 records (without EXSAF board)
900 records (with EXSAF board)
0: If the SAF memory becomes full during
scanning, the successfully scanned pages are
transmitted.
1: If the SAF memory becomes full during
scanning, the file is erased and no pages are
transmitted.
Not applicable to parallel memory transmission
This bit determines which identifier, RTI or CSI, is
displayed on the LCD while the machine is
communicating in G3 non-standard mode.
1: File numbers are not printed on any reports.
If authorized reception is enabled in this condition,
the machine will not receive any fax messages.
If customer intends to do so, change this bit to "1"
before enabling Authorized Reception. Otherwise,
keep this bit to "0 (default setting)" so that the
customer will not mistakenly set up the machine
not to receive any fax messages.
4-27
BIT SWITCHES
A230/A231/A232