Ricoh A230 Service Manual page 750

System Switch 12
No FUNCTION
0
TTI/CIL printing position in the
to main scan direction
7
CIL: Command Information
Line (Group 4)
System Switch 13 - Not used (do not change the settings)
System Switch 14
No FUNCTION
0
Action when JBIG files and
MH/MR/MMR files are mixed
in batch transmission
0 : JBIG files are transmitted
separately
1 : Transmitted in one batch
1
Not used
to
5
6 File no. print in TTI
0 : Enabled
1 : Disabled
7 Page no. print in TTI
0 : Enabled
1 : Disabled
System Switch 15
No FUNCTION
0
Not used
1
Going into the Night mode
automatically
0 : Enabled
1 : Disabled
2
DRAM backup during Night
mode
0 : Disabled
1 : Enabled
3
Not used
to
7
SM
COMMENTS
08 to 92 (BCD) mm. Input even numbers only.
This setting determines the print start position for
the TTI and CIL from the left edge of the paper. If
the TTI is moved too far to the right, it may
overwrite the file number which is on the top right
of the page. On an A4 page, if the CIL is moved
over by more than 60 mm, it may overwrite the
page number.
COMMENTS
0 : JBIG files are transmitted separately from
MH/MR/MMR files.
1 : JBIG files are converted into MH, MR, or MMR
format, and transmitted in one batch together with
MH/MR/MMR files.
Do not change the settings.
1: File number will not be printed in TTI. (G3 only)
1: Page number will not be printed in TTI. (G3
only)
COMMENTS
Do not change the setting.
1: The machine will restart from the Energy Saver
mode quickly, because the +5V power supply is
active even in the Energy Saver mode.
1: The machine backs up the DRAM (SAF and
Page Memory) even in the Night mode.
If the machine frequently goes into Night Mode,
keep this bit at "0 (default setting)" to backup SAF
data in case of a real power-down.
Do not change the settings.
4-25
BIT SWITCHES
A230/A231/A232