Exit Sensor And Inverter Sensor - Ricoh A230 Service Manual

SENSOR REPLACEMENT

4.4.3 EXIT SENSOR AND INVERTER SENSOR

[D]
[E]
[A]
[B]
[C]
1. Remove the front cover and rear cover.
2. Remove the two exit gate springs [A].
3. Remove the right exit cover [B] (3 screws).
Exit Sensor
4. Replace the exit sensor [C] (1 connector).
Inverter Sensor
4. Remove the inverter sensor guide [D].
5. Replace the inverter sensor [E] (1 connector).
12-28
A230/A231/A232 SM