Paper Feed - Ricoh A230 Service Manual

PAPER FEED

6.6 PAPER FEED
6.6.1 PICK-UP, SEPARATION, AND FEED ROLLERS
1. Remove the paper tray.
2. Remove the pick-up roller [A].
3. Remove the feed [B] and separation rollers [C] (1 clip each).
NOTE: Do not touch the roller surface with bare hands.
After installing the new rollers, do SP 7-816 for the appropriate paper tray.
6.6.2 LOWER RIGHT COVER/LOWER REAR COVER
[F]
[E]
NOTE: If the optional LCT has been installed, remove the LCT before doing the
following procedure.
1. Remove the upper connector cover [A] and lower connector cover [B] then
disconnect the harnesses [C].
2. Remove the lower rear cover [D] (4 screws).
3. Remove the unit band [E] (1 clip) and remove the vertical transport cover [F].
4. Remove the lower right cover [G] (5 screws).
A230/A231/A232
[A]
[C]
[G]
A230R908.WMF
6-32
[B]
[C]
[C]
[D]
[A]
[B]
SM