Photoconductor Unit (Pcu) - Ricoh A230 Service Manual

6.3 PHOTOCONDUCTOR UNIT (PCU)

6.3.1 PCU
[A]
1. Open the right cover and front cover.
2. Pull the PCU [A] out slightly while pushing the release lever [B].
3. Push the development unit to the left. Then, pull the PCU out, holding the
handle [C].
When reinstalling the PCU, make sure of the following:
• The development unit should be pushed to the left.
• The mylar [D] should not be deformed by the PCU entrance seal [E].
SM
[B]
[C]
A230R301.WMF
A230R308.WMF
6-19
PHOTOCONDUCTOR UNIT (PCU)
NG
OK
[E]
[D]
A230/A231/A232