Hard Disk (Function 08) - Ricoh A230 Service Manual

4.1.14 HARD DISK (FUNCTION 08)

NOTE: To access this function, the hard disk option must be installed, and
System Switch 05, bit 4 must be set to 1.
1. Enter the fax service mode.
2. Press - 5
3. Press one of the following numbers, as
required, then press !
. – Erases everything stored on the
hard disk
/ – Low level hard disk formatting
(requires over 50 min.)
NOTE: If there is an error during the test, the machine displays 'NG'.
4. Make sure that OK is displayed after the process, then exit the service mode.
4.1.15 SERVICE STATION FAX NUMBER (FUNCTION 09)
1. Enter the fax service mode.
2. Press - 6
3. Enter the fax number of the service
station that will receive Automatic Service
Calls from this machine. To use a G4
number, press the 'F4' key.
4. Press OK.
5. Exit the service mode.
4.1.16 SERIAL NUMBER (FUNCTION 10)
1. Enter the fax service mode.
2. Press . -
3. Enter the fax unit's serial number at the
keypad, then press OK.
4. Exit the service mode.
SM
SERVICE LEVEL FUNCTIONS
4-9
A233M578.tif
A233M527.tif
A233M528.tif
A230/A231/A232