Ricoh A230 Service Manual page 727

SERVICE LEVEL FUNCTIONS
Example:
1. Press .
2. Scroll through the bit switches.
To increment the bit switch number:
press '↓ Switch'.
To decrement the bit switch number:
press '↑ Switch'.
Example:
To display bit switch 03: Press '↓
Switch' 3 times.
3. Adjust the bit switch.
Example:
To change the value of bit 7, press 7.
4. To adjust more bit switches, go to step 2.
To finish, press 'OK' then 'PrevMenu'.
5. Exit the service mode.
NOTE: After changing any of the G4 bit switches, be sure to turn the main power
switch off and back on to activate the new settings.
4.1.3 SYSTEM PARAMETER LISTS (FUNCTION 02)
1. Enter the fax service mode.
2. Press - /
3. Press one of the following numbers, as
required:
. – G3 system parameter list
/ – G4 system parameter list
NOTE: An optional G4 interface is required to print the G4 system parameter
list.
4. Press !
5. Exit the service mode.
A230/A231/A232
4-2
A233M505.tif
A233M506.tif
A233M507.tif
SM