Ricoh A230 Service Manual page 1010

Rev. 06/99
Description of Modification
Corrects the following:
•
Jam Reset - When a "C" jam
occurs, opening doors other than the
front or right door can reset the jam.
Modified 'so that the "C" jam can
only be reset by opening the front or
right door.
•
Bin Tray Motor abnormal
operation - The Exit Motor Off signal
is misread as ON so the motor
continues to switch ON/OFF.
•
Incorrect detection of Door Open
- The serial data from the 1st bin
tray is misdetected as door
open/closed so machine initialization
occurs, if this misdetection occurs
when paper is fed, a jam occurs.
•
Online added - [Online] has
been added for the printer fonts for
the China/Taiwan machines. Please
install this version when adding the
printer for the China/Taiwan
machines.
•
Characters from registered fonts
cannot be displayed - The registered
fonts are not displayed on the
Chinese machines during 4-line
displays. Please install this version
when adding the Scanner option on
the Chinese/Taiwan/Asian
machines.
•
English display errors in
SP Mode - SP2301, 2309: Changed
"Toner" to "Trans."
SP2209-002: Changed "Tonert" to
"Toner."
SM
Firmware Level Serial Number
A2325113 Q N/A
7-31
ROM HISTORY
Firmware
Version
13.6.23 na
A230/A231/A232