Ricoh A230 Service Manual page 179

DUPLEX UNIT INSTALLATION
[F]
[D]
[C]
[E]
[A]
A230I653.WMF
[B]
13. Open the by-pass feed table [A], if it has been installed.
14. Set the duplex unit on the shaft [B].
15. Connect the link [C] to the pin [D] (1 snap ring).
16. Connect the duplex I/F harness [E].
17. Install the connector cover [F] (1 screw).
18. Turn on the main power switch and check the duplex unit's operation.
A230/A231/A232 SM
3-38