Quantum Data 881 User Manual page 1110

2748
2760
2761
2762
2763
2800
2801
2802
2803
2804
2805
2806
672 Appendix C Error Messages
Analog video signal type not supported
The generator hardware configuration does not support the video format's analog video
type selection.
Digital video not supported
The generator hardware configuration does not support the video format's digital video
type selection.
Digital video signal swing out of range
The value specified for the digital video signal swing is out of range.
Digital video swing calibration out of range
The value specified for the digital video swing calibration is out of range.
Invalid XVSI
The value specified for the interface selection (XVSI) is invalid.
Pseudo-random noise seed value exceeds limit
The seed value for the pseudo-random noise analysis exceeds its maximum value.
Pseudo-random noise sequence exceeds limit
The length of the pseudo-random noise sequence exeeds maximum value.
Pseudo-random noise type is not supported
The pseudo-random noise type is not supported.
No signal input to analyzer or TMDS error
There is no signal input to the receive interface of the analyzer.
X coordinate for delta patch out-of-range
The value specified for the X coordinate of the delta patch test is out-of-range.
Y coordinate for delta patch out-of-range
The value specified for the Y coordinate of the delta patch test is out-of-range.
Patch height must be greater than one
The patch height specified for a delta error test must be greater than one.