Image Errors - Quantum Data 881 User Manual

3000-3999 Image errors

3000
3001
3002
3004
3005
3006
3007
3008
3010
882 Video Test Instrument User Guide (Rev A.35)
Invalid color name
The current firmware does not support a named color used by one or more primitives in
the user defined custom image
Invalid pattern name
The current firmware does not support a named fill patterns used by one or more
primitives in the user defined custom image
No image memory
There is not enough unused edit buffer memory space available to start a new custom
image editing session.
Invalid font name
The current firmware does not support a named font used by one or more primitives in the
user defined custom image
Image editor running
The current firmware does not allow a new custom image editing session to be started
while the current custom image editing session is still running.
Nothing to save
An attempt was made to save the contents of a custom image editing buffer when there
was no open custom image editing session to save.
Overwrite ROM Image
A user defined test image can not be saved using the same name as that of a built-in test
image (case insensitive).
Image save failed
Saving the contents of the custom image editing buffer failed for a reason other than those
reported by error codes 3005 or 3006.
R, G or B 8-Bit video DAC setting out of range
A combination of system calibration factors, user calibration multiplier settings and video
output level settings have resulted in one or more calculated input values to go below zero
or above the analog video Digital-to-Analog Converter's maximum limit of 255.
673