Quantum Data 881 User Manual page 1099

Hide thumbs Also See for 881:
Table of Contents

Advertisement

2080
2082
2083
2084
2085
2086
2087
2088
2089
2090
882 Video Test Instrument User Guide (Rev A.35)
Pixel rate too low
The video format's total (active + blanked) number of pixel clock cycles per horizontal scan
line multiplied by the horizontal scan rate is less than the minimum pixel clock frequency
supported by the generator hardware configuration for the format video type.
Number of bits not allowed
The generator hardware configuration does not support the number of data bits per color
for the serial digital video type selected in the video format.
Invalid quantizing mode
An invalid value has been specified for the digital video quantizing mode (DVQM)
parameter.
Invalid Pixel Repetition
In digital mode, double clocking is not supported for this specific hardware. This error may
be the result of an older FPGA or hardware.
Invalid Sampling Mode
The value specified for digital video sampling mode (DVSM) is not valid and is inconsistent
with the setting of digital video signal type (DVST).
Invalid Video ID Code
The value specified for the CEA-861 Video Identification Code (VIC) with the DVIC
parameter is invalid.
Invalid Number of Bits per Audio Sample
The value specified for number of bits per audio sample (NBPA) is invalid.
Invalid Sampling Rate
The value specified for audio sampling rate (ARAT) is invalid.
Invalid Number of Audio Streams
The value specified for number of audio streams (NDAS) is invalid.
Horizontal total not even
The generator hardware configuration does not support interlaced video formats with a
total (active + blanked) number of pixel clock cycles per horizontal scan line that is not
evenly divisible by 2.
-OR-
661

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

882

Table of Contents