Quantum Data 881 User Manual page 1121

9600
10000-10999 System errors
10000
10010
10020
10025
10026
10030
10031
10035
10040
882 Video Test Instrument User Guide (Rev A.35)
Can not save format to EPROM
An attempt was made to save a format edit buffer's contents to a location in the firmware
EPROM.
Out of memory
There is not enough unused battery backed user memory space to store the contents of
the given edit buffer
Invalid file check sum
The data object file that has been recalled from the generator's memory contains an
invalid checksum. Data may be corrupted.
Invalid file version
The data object file that has been recalled from memory contains a file version number
that does not match the current firmware. Data may not be properly interpreted by the
firmware
File type
The data object file that has been recalled from memory contains a file type identification
that is not supported by the current firmware.
File size
The size of the data object file that has been recalled from memory does not match the
size information stored in the file's header data.
Feature not implemented
The generator hardware configuration does not support one or more settings in the video
format.
Feature not available
The generator hardware configuration does not support the selected feature.
Video board not detected
An attempt was made to reprogram the firmware Flash EPROMs in a Model 822 series
generator without a video board installed. The video board's memory is used as a buffer
for the initial uploading of the firmware data.
Buffer overflow
The generator encountered a buffer overflow condition.
683