Position And Run - Agilent Technologies 7500 ICP-MS Operator's Manual

Agilent 7500 ICP-MS ChemStation Operator's Manual
Setting Up a Sequence

Position and Run

You can start the sequence from the middle of the Sample Log Table. To position
and run a sequence, complete the following steps:
1 Select Sequence>>Position and Run.
The Position and Run dialog box appears. It contains several keywords in blue
which are mainly used with the intelligent functions*. For more detailed informa-
tion, see the Intelligent Sequence Manual.
*Intelligent functions are available when the Intelligent Sequence software is
installed.
Position and Run Dialog Box
2 Click the line of the Sample Log Table where you want to start.
3 Click OK.
The Start Sequence dialog box appears.
6-13