Agilent Technologies 7500 ICP-MS Operator's Manual page 607

Agilent 7500 ICP-MS ChemStation Operator's Manual
Installing the Agilent 7500 ChemStation Software (Windows 2000)
After the installation, the Option Software dialog box appears.
Select the optional software, which is to be added and enter the registration numbers
they are in the registration pack if purchased.
10 Click OK, then ICP-MS configuration dialog box appears.
Check the ICP-MS Configuration and then click the Save button to save the
configuration.
N O T E The IP address must be the same as set in the Bootp configuration window.
19-31