Editing Report Information - Agilent Technologies 7500 ICP-MS Operator's Manual

1 Select a report style in Style.
2 Select the destination to which the report is to be output in Destination.
3 When creating a QC report, check the Generate QC Report box.
N O T E
4 Click on Next.
Agilent 7500 ICP-MS ChemStation Operator's Manual
Creating a Method

Editing Report Information

Edit the report information by the procedure described below.
Reports page
• Screen
Creates a report and displays it in the report pad.
• Printer
Creates a report and outputs it to the connected printer. For a detailed report, the
output destination is set to the printer only.
• File
Creates a report and saves it as a file. Enter the filename.
The QC database must be edited after the method wizard is closed.
When the QC mode doesn't include a QC check, the Generate QC Report check box
will be grayed out.
The Finish page appears.
5-10