Agilent Technologies 7500 ICP-MS Operator's Manual page 310

Agilent 7500 ICP-MS ChemStation Operator's Manual
Setting Up a Sequence
Enter the name of the CSV file, and then click Save.
The following figure shows the relationship between the Sample Log Table and the
CSV file. If there is a entry which you want to leave blank, a comma should be set
for that in the CSV file.
Sample Log Table and CSV File
13 Click OK.
The sequence is saved into memory. To save it onto the hard drive and assign a name
for the sequence, see "Saving a Sequence" later in this chapter. You must save the
sequence before exiting the ChemStation, otherwise the Sample Log Table informa-
tion will be lost.
ChemStation returns to the Top window.
6-12