Loading An Autotune Target File - Agilent Technologies 7500 ICP-MS Operator's Manual

Agilent 7500 ICP-MS ChemStation Operator's Manual
Tuning

Loading an Autotune Target File

To use a saved Autotune Target file, load the file by completing the following steps
from the Autotune Targets dialog box:
1 Click the load button in the Set Autotune Targets Dialog box.
The Select Autotune Targets File dialog box appears.
The Select Autotune Targets File Dialog Box
2 Select the autotune target file in one of the following ways:
• Type the name of the autotune target file and click OK.
• Double-click an Autotune Target file in the displayed list.
• Click an Autotune Target file in the displayed list and click OK.
4-114