N O T E
Agilent 7500 ICP-MS ChemStation Operator's Manual
Viewing Spectra
Changing the Vertical Scale of a Spectral Display
The scale for each row of the spectrum appears to the left of the row, and the number
in the scale box indicates the scale of the current display. Increase or decrease the
vertical scale as required.
To change the vertical scale for each row of the spectral display, complete one of the
following steps:
• Click the up or down arrow to the right of the scale box.
The full scale height decreases if you click the down arrow and increases if you
click the up arrow.
• Click the horizontal bar to the right of the scale box (under the two arrows). Select
a number from the displayed list by clicking it.
The full scale height decreases if you click a smaller number than the number that
appears in the scale box and increases if you click a larger number than the num-
ber that appears in the scale box.
Regardless of which method you use, you must repeat the process for each row in the
display window.
9-9