Agilent Technologies 7500 ICP-MS Operator's Manual page 324

Agilent 7500 ICP-MS ChemStation Operator's Manual
Chained Sequence
2 Set the following items of the chained sequence table.
• Sequence File...
Double-click the Sequence File field you want to set. The Select Sequence File
dialog box appears. Select an existing sequence file you want to run.
Select Sequence File Dialog Box
N O T E When you use Reprocessing Only as the Method Section to Run, select the "result.s"
file in the data batch directory you want to reprocess, which contains the actual
sequence log. The original sequence file contains no data file names and does not
reflect any additional analysis which the intelligent sequencing may have scheduled
as a result of QC failures or a periodical run.
Intelligent functions are available when the Intelligent Sequence software is
installed.
7-4