Tuning - Agilent Technologies 7500 ICP-MS Operator's Manual

Agilent 7500 ICP-MS ChemStation Operator's Manual
Appendix
[Maintenance Log]
[Log Book...]
[Help]
[Help topics]
[About...]

Tuning

[File]
[Load Tune Values...]
[Save Tune Values...]
[Load Factory Defaults]
[Generate Report]
[Print]
[Copy Tune Parameters...]
[Exit]
[Tune]
[Sensitivity]
[Oxide Ion]
[Doubly Charged Ion]
[Resolution/Axis]
[P/A Factor]
[Generate P/A Factor Report]
[Reaction Gas]
[Full Spectrum]
[Autotune...]
[Peri Pump Program for Autotune]
[RF Matching]
[Dead time calibration...]
[Acq. Params]
[Acquisition Parameters...]
---For models 7500ce and 7500cs
---When dead-time calibration is used
A-5