Agilent Technologies 7500 ICP-MS Operator's Manual page 524

Agilent 7500 ICP-MS ChemStation Operator's Manual
Tools Menu
The available report options are displayed in the Options List. These options include
report type and destination, as well as the ability to generate custom reports, update
custom databases, and run user-specified macros.
4 Select the report options to include in the Selected Options list by clicking on an
option in the Options List, then clicking Add.
Up to six options can be selected for inclusion in the Selected Options list. If you
want to remove any of the options from the Selected Options list, select the option to
be removed then click Remove. You can also double-click the appropriate option to
add or delete. Options can be selected only one at a time.
• Option List Box
Select the report options appearing in this list box. Selected options appear in
the Selected Options list box.
• Selected Options List Box
The report options selected from the Option List box are displayed. To remove
the options, select them in this list box. You can select 1- 6 types of option.
• Add
Select the report options from the Option List box and click this button to add
them to the Selected Options list box.
• Remove
Select the options you want to delete from the Selected Options list box and
click this button to remove them from the display.
• OK
End setting and close the dialog box.
• Cancel
Cancels setting the configuration DoList.
5 After you finish selecting the report options you desire, click OK.
The options selected will be the options that are subsequently displayed in the Select
a Report Option panel that appears after selecting DoList from the Tools menu.
16-6