Loading A Method And Calibration - Agilent Technologies 7500 ICP-MS Operator's Manual

Agilent 7500 ICP-MS ChemStation Operator's Manual
Creating a Method

Loading a Method and Calibration

Before you can modify a method, you must first load it into memory. To do so, com-
plete the following steps:
1 Select Top>>Methods.
The Methods menu appears.
2 Select Methods>>Load from the ICP-MS Top window.
The Load Method File dialog box appears.
Load Method Dialog Box
3 To load the method, select it in one of the following ways:
• Type the name of the method and click OK. If the directory path in the Load
Method dialog box is incorrect, you must select the correct directory path.
• Double-click the method in the displayed list.
The three most recently loaded methods are listed as numbered menu items, with the
first entry corresponding to the most recently loaded method. Selecting any one of
these numbered menu items will cause that method to be loaded.
5-92