Modifying The Method Information - Agilent Technologies 7500 ICP-MS Operator's Manual

1 Select Top
2 Select Methods
3 Make the changes you want and click OK.
4 To save the method, select Methods
N O T E
Agilent 7500 ICP-MS ChemStation Operator's Manual
Creating a Method

Modifying the Method Information

If you do not want to change the method parameters, but want to add comments
about the method or change the conditions for running and saving the method, you
can edit the method information section of the method separately. To do so,
complete the following steps:
>>
Methods.
The Methods menu appears.
>>
Edit Method Information.
The Method Information dialog box appears. For more information about this
dialog box, see "Entering the Method Information" in this chapter.
The dialog box disappears, but changes are not recorded to the method until you
save the method.
The Method Save Options dialog box appears. Save the method as described in
Saving a Method and Calibration earlier in this chapter.
You can also modify this section of a method by selecting Method
Method. Click only the Method Information box in the Edit Entire Method dialog
box, and click OK. When the Method Information dialog box appears, make the
changes you want and click OK. Then, complete the saving steps as described in
Saving a Method and Calibration earlier in this chapter.
5-94
>>
Save.
>>
Edit Entire