Agilent Technologies 7500 ICP-MS Operator's Manual page 484

N O T E
1 Select SemiQuant
2 Select Auto Add Mode button on the top of the dialog box if it is not already
3 Click the Internal Standard Correction check box on the top of the dialog box if
4 Click the Browse push button.
Agilent 7500 ICP-MS ChemStation Operator's Manual
Performing a Semiquantitative Analysis
To use the Internal Standard Correction manually, a data file to be used as the
"Internal Standard Data File" should be acquired prior to setting up the Internal
Standard Correction. When a sequence is used, the Internal Standard Correction can
be set in the Type. The solution should be either a blank or a calibration standard
acquired using on-line ISTD addition.
>>
Internal Standard Correction.
The Internal Standard Correction dialog box appears.
Internal Standard Correction Dialog Box
selected.
it is not already checked.
The Internal Standard Correction check box will be checked.
The Select Data File dialog box appears.
13-18