Agilent Technologies 7500 ICP-MS Operator's Manual page 540

4 Right-click the user name, then select Set Password and set the password for
N O T E
5 Right-click the user name, then select Set Properties.
6 Enter the Description and set the password properties.
7 Select Member Of tab, then click Add button.
8 Click Advanced button in Select Groups.
9 Click Find Now button, then select the group name and click OK.
10 Close the Computer Management after setting the users.
N O T E
C A U T I O N
Agilent 7500 ICP-MS ChemStation Operator's Manual
Installing the Agilent 7500 ChemStation Software (Windows XP)
each user name.
To create a new user account, select Action>>New User menu in the Computer
Management.
When create a new user, set the same setting of section 4 through section 7.
The local user account in this section is a typical example. The information contained
in this section is subject to change without notice.
18-10