Creating User Account - Agilent Technologies 7500 ICP-MS Operator's Manual

Agilent 7500 ICP-MS ChemStation Operator's Manual
Installing the Agilent 7500 ChemStation Software (Windows XP)
N O T E
User Name Description
Support Product Support
Chemist ChemStation Chemist
User ChemStation User
Administrator (keep the displayed
description.)
1 Logon as Administrator.
2 Select Administrative Tools>>Computer Management in the Control Panel.
3 Select Local Users and Groups>>Users in the left area of the Computer
If you connect the instrument to the local network, you will need to talk with the
network administrator. You may want to call your local ICP-MS tech support team
for additional assistance.
To connect to site LAN, you are expected to understand the Windows XP operating
system and TCP/IP networking, such as host name, IP address, subnet mask settings.
You should also be familiar with the particular hardware devices and configurations
of your organization's local area network.
Agilent Technologies is not responsible for any software problems, LAN
configuration conflicts or performance problems that may result when a system is
connected to a non-isolated LAN.

Creating User Account

Creating User Account as follows:
Password
HPCE
hp
3000hanover
To create or modify the user account, complete the following steps;
Management.
Password property
Select Password never expires
check box only. Do not select other
check boxes.
Select Password never expires
check box only. Do not select other
check boxes.
Select Password never expires
check box only. Do not select other
check boxes.
Select Password never expires
check box only. Do not select other
check boxes.
Group
Administrators
Power Users
Users
Administrators
18-9