Modifying Data Analysis Parameters - Agilent Technologies 7500 ICP-MS Operator's Manual

Agilent 7500 ICP-MS ChemStation Operator's Manual
Creating a Method

Modifying Data Analysis Parameters

ChemStation enables you to change each parameter separately. To do so, complete
the following steps:
>>
1 Select Top Data Analysis.
The Data Analysis menu appears.
2 Select Data Analysis
The ICP-MS Data Analysis window appears.
ICP-MS Data Analysis Window
3 Modify all the data analysis parameters that need to be changed.
Data analysis parameters include:
• Data Correction (Background Subtraction, Interference Correction)
• Select Reports
• Calibration Table for FullQuant
• Blank Subtraction for FullQuant / SemiQuant
• Edit SemiQuant parameters for Semiquantitative Analysis
• Internal Standard Correction for Semiquantitative Analysis
• Edit IR Parameters Isotope Ratio Analysis (IR)
• Edit ID Parameters for Isotope Dilution Analysis (ID)
• Layout custom reports
5-102
>>
Main Panel.