Generating An Isotope Ratio Analysis Report - Agilent Technologies 7500 ICP-MS Operator's Manual

1 Select Top
2 Select Data Analysis
N O T E
3 Select Data File>>Load.
Agilent 7500 ICP-MS ChemStation Operator's Manual
Performing an Isotope Ratio Analysis

Generating an Isotope Ratio Analysis Report

You can tell ChemStation to generate the report automatically each time a method
runs. When you do so, you specify whether to generate an Isotope Ratio Report or a
Count Report (see below), and whether to send the report to the screen, the printer or
a file. For information about how to generate an Isotope Ratio Analysis report
automatically (using a method), see Chapter 5, "Creating a Method".
If you did not tell ChemStation to generate a report automatically, you can also
generate a report manually.
To do so, complete the following steps:
>>
Data Analysis.
The Data Analysis menu appears.
>>
The Data Analysis window appears.
You can also work on the Offline Data Analysis by double-clicking on the Offline
Data Analysis icon.
The Load Data File dialog box appears.
14-8
Main Panel.