Changing The Vertical Scale Of A Time Chart - Agilent Technologies 7500 ICP-MS Operator's Manual

N O T E
Agilent 7500 ICP-MS ChemStation Operator's Manual
Viewing a Time Chart

Changing the Vertical Scale of a Time Chart

Whether you are viewing a Total Ion Chart or an Extracted Ion Chart, ChemStation
enables you to change the vertical scale of the display. The scale for each chart
appears to the left of the chart, and the number in the scale box indicates the scale of
the current display. Increase or decrease the vertical scale as required.
To change the vertical scale of the displayed time chart, complete one of the
following steps:
• Click the up or down arrow to the right of the scale box.
The full scale height decreases if you click the down arrow and increases if you
click the up arrow.
• Click the horizontal bar to the right of the scale box. Select a number from the
displayed list by clicking it.
The full scale height decreases if you click a smaller number than the number
that appears in the scale box and increases if you click a larger number than the
number that appears in the scale box.
Regardless of which method you use, you must repeat the process for each chart
shown in the Time Chart window.
10-12