Agilent Technologies 7500 ICP-MS Operator's Manual page 326

Agilent 7500 ICP-MS ChemStation Operator's Manual
Chained Sequence
• Tune File...
You must choose the tune file for each sequence. Double-click a Tune File field you
want to set. The Select Tuning File dialog box appears. Select an existing tuning
file you want to use.
Select Tuning File Dialog Box
• Stabilization [Sec]...
You can set a delay to allow for the stabilization time when changing the tuning
conditions. Select a Stabilization Time field, and type a value.
• Action on Failure...
You can set Action on Failure when a sequence is aborted. Select Abort or
Continue by double-clicking the field.
• Method Section to Run...
Select Full Method or Reprocessing Only.
You can use the edit menu which contains Cut, Copy, Paste, Insert, Delete line, and
Insert new line by clicking the right mouse button.
7-6