Labeling A Time Chart - Agilent Technologies 7500 ICP-MS Operator's Manual

1 Ensure that a time chart displays in the ICP-MS Data Analysis window.
2 Place the cursor exactly where you want the label to appear.
3 Click both mouse buttons at the same time.
4 Click the Left, Center, or Right Justify button.
5 Type a name or other identifying information in the text box.
6 Click Add.
N O T E
Agilent 7500 ICP-MS ChemStation Operator's Manual
Viewing a Time Chart

Labeling a Time Chart

You may want to label the Total Ion Chart created by integrating results for elements
in a sample. You can also label an Extracted Ion Chart. ChemStation enables you to
name or add identifying information to a time chart prior to printing.
To label a time chart, complete the following steps:
If the ICP-MS Data Analysis window displays a spectrum, you must load the appro-
priate data file. For more information, see "Loading a Data File" in this chapter
Note both the horizontal and vertical placement of the cursor.
The Annotate dialog box appears.
Annotate Dialog Box
The label will appear to the left, center, or right of the location you specified in
Step2.
ChemStation returns to the time chart, and the information you typed appears at the
location of the cursor.
You can change and delete the text by clicking exactly on top of the previously
labeled point, rewriting the text, then clicking Update in the Annotate dialog box.
10-16