Setting Concentration Levels - Agilent Technologies 7500 ICP-MS Operator's Manual

N O T E
4 Select the location of the data file using Directory: in the upper left section.
5 Select a data file from the list box in the lower left section and click Add->.
6 Repeat Steps 3 and 4 to select more data files.
N O T E
Agilent 7500 ICP-MS ChemStation Operator's Manual
Performing a Quantitative Analysis
Up to 20 levels can be set in a data file.
Select a drive in the upper list box and choose a folder in the lower list box. A list of
data files contained in the folder will be shown in the lower left section.
The selected data file will be added to the Data File field in the right-side table.
Double-clicking on a data file in the lower left section will also add that data file to
the Data File field. The selection can be cancelled by double-clicking on the Data
File field.
To save a data file together with a method, it is necessary to save the method. For data
analyses, close the Data Analysis window and select Top window >> Method >>
Save. For offline data analysis, select Offline Data Analysis window >> Method >>
Save.

Setting Concentration Levels

After selecting data files corresponding to standard samples, set the concentration
information for each sample standard.
12-7