Viewing And Editing Replicate Files - Agilent Technologies 7500 ICP-MS Operator's Manual

1 Place the cursor on the element or any other cell in the same row you want to
2 Select RepetitionFile>>Exclude Element(s).
N O T E
3 Select RepetitionFile>>Recalculate Average.
Agilent 7500 ICP-MS ChemStation Operator's Manual
Viewing Spectra

Viewing and Editing Replicate Files

You are able to view and edit replicate files individually on the workbook. Editing
the replicate files includes excluding certain data from the average file in case the
data was not acceptable. An example would be in the event there was insufficient
sample volume in the sample vial, with the result that the sample ran out during
acquisition. For auditing purposes, only the spread sheet is altered, not the original
data files, which are binary files and not editable.
Select the sheet with the replicate data file name indicated at the bottom of the work
sheet, then the replicate data file appears.
Data of a Replicate File (One Element Excluded)
To exclude a certain element on a certain replicate file, or to exclude a whole repli-
cate file from the average file, complete the following steps:
exclude and click.
The selected cell will be outlined.
The selected element will be crossed out in blue.
To exclude the whole replicate file, RepetitionFile>>Exclude All Elements.
The database will recalculate the average file not including the data just excluded
and display the average data sheet.
9-30