Setting Acquisition Parameters; Spectrum - Agilent Technologies 7500 ICP-MS Operator's Manual

Agilent 7500 ICP-MS ChemStation Operator's Manual
Creating a Method

Setting Acquisition Parameters

The following sections explain the six acquisition modes:

Spectrum

Using the Spectrum mode, you can perform qualitative, semiquantitative, and
quantitative analysis. This section will explain how to set parameters for all three
types of analysis.
To set the Acquisition Mode to Spectrum, complete the following steps:
1 Click the Spectrum.
The button is marked and the selected mode is outlined.
2 Click OK.
ChemStation sets Spectrum as the acquisition mode for the method and the Spec-
trum Acquisition Parameters dialog box appears.
Spectrum Acquisition Parameters Dialog Box
5-20