Agilent Technologies 7500 ICP-MS Operator's Manual page 608

11 Insert G1833-60840 Parameter Disk Assy into Floppy disk driver and click OK.
12 Click Yes if you need the "Installation Checkout Method".
13 The Readme.txt appear. Read the Readme.txt and Exit the Readme.txt.
14 The message asking for the Agilent 7500 to be placed in Shutdown mode is
N O T E
15 Reboot the computer.
16 Install the Patch File if necessary. Refer to page 19-35.
Agilent 7500 ICP-MS ChemStation Operator's Manual
Installing the Agilent 7500 ChemStation Software (Windows 2000)
displayed. Click OK.
If the instrument is not in shutdown mode, press the shutdown switch on the
underside of the right instrument cover. The instrument transfers to shutdown mode
(it takes approximately 5 minutes). When it is in shutdown mode, the status LED
indicator on the cover turns off.
19-32