Saving The Chained Sequence - Agilent Technologies 7500 ICP-MS Operator's Manual

Agilent 7500 ICP-MS ChemStation Operator's Manual
Chained Sequence

Saving the Chained Sequence

After the changes are made to the chained sequence table, you can save these
changes to disk by completing the following steps:
1 Select Chained Sequence>>Save.
The Save Chained Sequence dialog box appears.
Save Chained Sequence Dialog Box
2 Enter the name of the chained sequence.
3 Click OK.
ChemStation saves the chained sequence to disk, and the dialog box disappears.
The name can be up to eight characters long. It must not contain the following char-
acters:
Period (.)
Comma (,)
Semicolon (;)
Colon (:)
ChemStation adds a .chs to the end of the name to indicate it is a chained sequence
file. All chained sequences are stored in the c:\icpchem\1\chnseq directory.
Slash (/)
Backslash (\)
Equal sign (+)
Quotation mark (")
Brackets ([])
Vertical bar (|)
Space ( )
7-9