Agilent Technologies 7500 ICP-MS Operator's Manual page 460

Agilent 7500 ICP-MS ChemStation Operator's Manual
Performing a Quantitative Analysis
2 To output the header information (title, standard data file name, etc.) and the
data file information, select the Header Information and Standard Files check
box.
Calibration - Print Dialog Box
3 To print the content of the Table tab screen, select the Table check box.
4 To print the content of the Graph Summary tab screen, select the Graph
Summary check box.
5 To print the content of the Graph Detail tab screen, select the Graph Detail check
box, and enter the following settings.
1) Select the element or elements for which you want to print out the calibration
data.
• Current Element: element whose calibration curve is displayed on the Graph
Detail tab screen
• All Elements: all elements in the table on the Graph Detail tab screen
• Selected Elements: The elements to be printed can be selected by highlighting the
selected elements in the Elements list box and clicking Add->. To cancel a
selection, select an element in the Selected Elements list box and click <-
Remove. Selections can also be added to or removed from a list by
double-clicking them. Multiple consecutive elements can be selected by pressing
the Shift key and clicking on consecutive elements. Any multiple elements can
be selected by pressing the Ctrl key and clicking on the desired elements.
12-24