Agilent Technologies 7500 ICP-MS Operator's Manual page 582

6 Internet Protocol (TCP / IP) Properties
N O T E
Agilent 7500 ICP-MS ChemStation Operator's Manual
Installing the Agilent 7500 ChemStation Software (Windows 2000)
Click on the Number tab and Select "." (Dot) in the Decimal Symbol box.
Click OK.
1 Double click Network and Dial-up Connections icon in the Control Panel.
2 Right click Local Area Connection, select Properties.
3 Select Internet Protocol (TCP / IP), select Properties.
4 Input the following information for a simple direct connection.
IP address : 192.168.1.127
Subnet mask : 255.255.255.0
5 Click Advanced button, select WINS tab, then select ON the Enable LMHOSTS
lookup.
6 Click OK.
If you connect the instrument to the local network, you will need to talk with the
network administrator. You may want to call your local ICP-MS tech support team
for additional assistance.
To connect to site LAN, you are expected to understand the Windows XP operating
system and TCP/IP networking, such as host name, IP address, subnet mask settings.
You should also be familiar with the particular hardware devices and configurations
of your organization's local area network.
19-6