Running A Chained Sequence - Agilent Technologies 7500 ICP-MS Operator's Manual

Agilent 7500 ICP-MS ChemStation Operator's Manual
Running a Sample Analysis

Running a Chained Sequence

Running the chained sequence starts the sample analysis. To run a sequence that
is already loaded, complete the following steps from the Top window:
1 Select Chained Sequence>>Edit and Run.
The Edit Chained Sequence dialog box appears.
Edit Chained Sequence Dialog Box
2 Click Run.
The analysis starts and the sequence currently running is indicated in blue. The table
remains open during the sample run. You can view a real-time display of the run
without closing the table. For more information about monitoring a run, see
"Monitoring a Run" later in this chapter for instructions.
8-9