Agilent Technologies 7500 ICP-MS Operator's Manual page 348

7 Place the sample uptake tube into the sample.
8 Click Acquire.
N O T E
Agilent 7500 ICP-MS ChemStation Operator's Manual
Running a Sample Analysis
Proceed to step 5).
3) To set a specific value for the current sample, select the Set Specific Value radio
button.
4) Set the concentration in the Conc field in the Current ISTD Conc table.
The Current ISTD Conc table shows the internal standard currently set for
calibration. Click on the Conc field and enter a concentration level.
Click the right mouse button to display the popup menu, which allows you to copy,
paste, or delete the field.
Click Browse to set the concentration setting for each calibration level in the
Concentration field.
5) Click OK.
The Set ISTD Conc dialog box will close and the internal standard concentration
level will be set in the Acquire Data dialog box.
If the Select a Calibration Level radio button was selected, the level number will be
displayed. If the Set Specific Value radio button was selected, "Manual" will be
displayed.
The analysis starts and the Real-Time display window appears. For more
information about this window, see "Viewing a Real-Time Display" in this chapter.
The Acquire Data dialog box contains OK, Cancel and Help buttons.
Click OK to accept the edited information without acquiring the data.
Click Cancel to cancel the edited information.
After the analysis starts, the Peristaltic Pump program runs. To set this, refer to
"Setting the Peristaltic Pump Program" in Chapter 5.
8-18