Table of Contents
Advertisement
Agilent 7500 ICP-MS ChemStation Operator's Manual
Startup, Shutdown and Status
Turning the Instrument Completely Off
Turn the Agilent 7500 completely off when you want to perform maintenance on
electrical components or to move the instrument. To achieve a total shutdown,
complete the following steps:
1 Put the Instrument into Shutdown Mode
Follow the instructions in "Putting the Instrument in Shutdown Mode"
2 Exit the software and turn off the computer and printer
Refer to Chapter 1, "Using the Agilent 7500 ICP-MS ChemStation Software", and
the printer and computer user's manuals for more information.
3 Turn off the power switch
The switches are located on the front side. The power indicator light is now off.
4 If needed, unplug the instrument
3-14
- Quick Links:
- Tuning for Sensitivity (Agilent 7500A)
Hide quick links:
Advertisement
Table of Contents
