Table of Contents
Advertisement
Agilent 7500 ICP-MS ChemStation Operator's Manual
Performing a Semiquantitative Analysis
Selecting Concentration Units for the Report
ChemStation will select a suitable concentration unit for each element being
reported, or you can choose the concentration unit for all elements being reported.
To select the concentration unit, complete the following steps:
1 Click on the arrow of the Conc. Unit box.
The Concentration Unit box appears.
Concentration Unit Box
2 Select a unit.
The selected unit will be used for all elements when the report is generated. You can
also select AUTO, and then ChemStation will select a suitable unit, dependent on
the concentration value found.
13-8
- Quick Links:
- Tuning for Sensitivity (Agilent 7500A)
Hide quick links:
Advertisement
Table of Contents
